The overflow pipe kit is a solution for the malt pipe in our brewing system. It makes it simple to avoid dry heating elements and grains in your wort.

The system is fastened to your filter (Punch out the pre-cut hole in the laser cut filter or use a 25mm hole punch for the standard filters).

It's adjustable from about half batch to a full malt pipe.

Note: We never recommend to run a high power brewing system without supervision. This safety solution does not guarantee avoiding burnt heating elements due to dry running.

Included in the package:
- Overflow pipe with M24 threads, 180mm
- Pipe kit, 200, 300 and 400mm)
- Silicone parts
- Filter, laser cut
- M24 nut
- M24 hole cover